Ultimate9 LED 40W Cube Work Lamp Pedestal Mount
Whether from a canopy, trailer, roof rack or rear bar, easily illuminate & unveil your campsites, worksites, or trails when tackling the dark.
With x4 Osram® 10W LED chips, a spot pattern reflector, and a Lexan® Polycarbonate diffused lens - the Pedestal Work Light will throw a large area of light, reaching 1 Lux at 75m.
Tested to meet the highest waterproof ratings, a 6063-grade aluminium housing and military grade breather allow wider & greater heat dissipation - improving longevity.
Better still, it's easy to mount with its single stainless-steel bolt.
Water & Dust Protection: Tested to the highest IP ratings, IP68 and IP69K.
IP68 for term-long submersion and total dust ingress.
IP69K for stream jet cleaning.
Ventilation: Military grade breather valve equalises internal pressure to prevent seal failure, moisture and dust ingress as the aluminium housing heats and cools - eliminating condensation & fogging.
Housing: Diecast 6063 aluminium housing with 304 Stainless Steel fastener. Overlaid with a UV & corrosion resistant Dupont® coating.
Lens: GE Lexan® Polycarbonate lenses are virtually indestructible, UV, scratch and impact-resistant; they negate the need for additional protective covers.
Optics: Diffused Flood Beam Pattern.
Technology: 4x Grade A Osram 10W LED chips & sealed DT connectors.
What Harness Do I Need?
Ultimate9 Work Lamps come supplied with their own individual harness. However, when installing two Work Lamps, Ultimate9’s Twin Output Harnesses can also be utilised.
- Work Lamp: Pedestal Mount
- 304 Stainless Steel fastener
- Wiring Harness: 2.5m Relay ~ DT connector | 1.3m Relay ~ Light Switch | 1.3m Relay ~ Power Terminals
Input Power: 9-36V
Beam Pattern: Diffused Flood
Current Draw: 2.3A @ 13.2V
Effective Lumen: 2,957 lm
Beam @ 1 Lux: 75m
LED Chips: Osram 10W
Colour Temp: 6000-6500K
Housing Material: Die Cast 6063 Aluminium
Housing Coating: DuPont®
Lens Material: GE Lexan® Polycarbonate
IP Rating: IP68 / IP69K
Ventilation: Military Grade
Weight: 0.9Kg, Loom - 0.25Kg
Body Dimensions: (L)82 x (H)76 x (W)83mm
Lens Dimensions: 2" x 2" (50 x 50mm)
Connector Type: DT Sealed
Operating Temp: -40ºC - 145ºC
Certification: CE, RoHS, RCM